承接项目
新闻中心

水泥塑石假山制作方法

水泥塑石假山即是指混凝土、玻璃钢、有机树脂等现代材料和石灰、砖、水泥等非石材料经人工塑造而成的假山。塑山与塑石可节省采石运石工序,造型不受石材限制,体量可大可小。
Cement and stone rockery refers to the artificial rockery made of modern materials such as concrete, FRP, organic resin and other non stone materials such as lime, brick and cement. Plastic mountain and plastic Shi Ke save stone operation process, the shape is not limited by stone, the volume can be small.
济南假山制作的步骤:
The steps of the Ji'nan rockery production:
一:主龙骨搭建,所用材料大小应根据假山大小需要,一般是角钢、槽钢之类,如果需要的话,搭建主龙骨的过程应同时搭建脚手架,这个过程要做到整体承重及摇摆的承受能力,要牢;
One: the construction of main keel should be based on the size of the rockery and the angle steel and the channel steel. If necessary, the scaffold should be built at the same time. The whole bearing capacity and the bearing capacity of the swing must be kept firmly.
二:搭建副龙骨,把假山的基本形焊出来,这个过程要做出基本的起伏关系;
Two: build a vice keel, welding the basic form of the rockery, this process to make basic ups and downs;
三:用角钢加固副龙骨与主龙骨之间的衔接并将主结构进一步加固;
Three: use angle steel to reinforce the connection between the auxiliary keel and the main keel and further reinforce the main structure.
四:用线材将造型加密细分至15cm左右见方的网格状;
Four: use the wire to subdivide the molding to the grid like about 15cm.
五:将龙骨做好防锈处理;
Five: the keel is treated with rust prevention.
六:用镀锌铁丝网将钢架包裹起来,网孔大小大约1cm比较合适,注意除去朝上的面以外尽量不要重叠。
Six: the steel frame is wrapped up with galvanized wire mesh. The size of the mesh is about 1cm suitable, and should be careful not to overlap as much as possible outside the face.
客户的满意就是对我们的肯定,欢迎您前来选购我公司的产品,我们一直以为您提供产品为己任并一直坚持这样做。欢迎您的光临。
Customer satisfaction is our affirmation. You are welcome to purchase our company's products. We have always thought that you are responsible for products and have always insisted on doing so. Welcome to your visit.
版权所有:济南老王假山水景园林

咨询热线:
13064079165
在线客服