承接项目
新闻中心

庭院假山水池制作的流程与方法

家庭假山水池的制作能够增强庭院的美观度,同时还能让环境变得更加和谐。家庭庭院鱼池假山制作的基本操作流程,其实就是连接。连接山石的胶合剂有水泥、环氧树脂、不饱和聚脂树脂。常用的假山连接多采用水泥,这种水泥也是特定制作假山的,水泥的标号越高越好。
The production of the family rockery pool can enhance the beauty of the courtyard and make the environment more harmonious. The basic operation process of making rockery in family courtyard is actually connection. The binders for connecting the rocks are cement, epoxy resin and unsaturated polyester resin. The commonly used rockery connection mostly uses cement, which is also specially made for rockery. The higher the cement grade, the better.
济南假山制作
首先先要调好水泥浆,注意浆要随用随调,还要注意浆的稀稠度。为增加凝固时间,可在水泥中适量加入堵漏材料;对于石体上需附着造型石体,可用云石胶固定,在胶体干后用水泥浆覆盖胶体,以协调整体色调。
First of all, the cement slurry shall be prepared, and the slurry shall be adjusted as it is used, and the consistency of the slurry shall be paid attention to. In order to increase the setting time, a proper amount of plugging materials can be added to the cement; for the stone body to be attached with modeling stone body, it can be fixed with marble glue, and after the gel is dry, it can be covered with cement slurry to coordinate the overall tone.
其次就是石材加工,把需要胶接的石头用锤、凿、锯等工具加工出纹理和比较奇特的形状来。为保证于上下石体相互支撑,对接触部位还需进行切割加工。
Next is the stone processing. The stone that needs to be glued is processed with hammer, chisel, saw and other tools to produce texture and more peculiar shape. In order to ensure the mutual support of the upper and lower stone bodies, the contact parts need to be cut.
接下来就是粘合山体,在需要粘合的山石面用涂上水泥浆使山石吻合为一体,粘合时要注意,对于比较大、重、粘不稳的石材,不要用小木棍支撑好,再粘接,待水泥浆完全干好以后,再把木棍撤去。尽量使山石粘合处看不出断裂的痕迹,为了接近天然,胶结泥未干时可在接缝处涂撒本石料的石屑。胶合后,先用其它的支撑物给予辅助,水泥胶合后的3-4小时,可用小刀锯条轻轻刮掉多余或污染石身的水泥,并在接缝处拉出与石料同样的纹理来。
The next step is to bond the mountain. The mountain stone surface to be bonded shall be coated with cement slurry to make the mountain stone fit together. During the bonding, attention shall be paid to that the relatively large, heavy and unstable stone materials shall not be supported by small wooden sticks, and then they shall be bonded. After the cement slurry is completely dry, the wooden sticks shall be removed. As far as possible, no fracture trace can be seen at the mountain stone bond. In order to be close to nature, when the cement mud is not dry, the stone chips of the stone can be spread at the joint. After gluing, other supports shall be used for assistance first. For 3-4 hours after cement gluing, the surplus or polluted cement of the stone body can be scraped off gently with a small knife saw blade, and the same texture as the stone can be pulled out at the joint.
以上就是济南假山制作厂家关于庭院假山水池的制作方法,希望对您有所帮助。
The above is the production method of Jinan rockery manufacturer about the garden rockery pool. I hope it can help you.
版权所有:济南老王假山水景园林

咨询热线:
13064079165
在线客服