承接项目
新闻中心

庭院假山鱼池制作流程大体流程!

  济南假山制作分别是根据风水设计(确定方位)、选择假山石材、假造假山鱼池、假山粘接方法、安装净水系统和循环系统、假山植物种植。只要按照此方法操作,建一座属于自己的庭院假山鱼池指日可待。
  According to the Fengshui design (determine the orientation), choose rockery stone, fake rockery fish pond, rockery bonding method, install water purification system and circulation system, and plant rockery. As long as this method is followed, a rockery fish pond of our own will be built soon.
  一、根据风水设计庭院假山鱼池应该根据风水知识设计,确定假山的摆放位置,庭院假山佳摆放方位是:西方位、西北方位、北方位、东北方位、西北方位。庭院假山的详细风水介绍,可以查看本站《庭院假山风水设计》
  1、 According to the Fengshui design, the rockery fish pond in the courtyard should be designed according to the Fengshui knowledge to determine the placement position of rockery. The best placement positions of rockery in the courtyard are: West position, northwest position, North position, northeast position and northwest position. For a detailed introduction to the fengshui of the garden rockery, please refer to the Fengshui design of the garden rockery on this website
  二、选择假山石材庭院假山鱼池常用假山石材有:太湖石、黄蜡石、千层石、龟纹石、英德石、吸水石等,可以根据所在地选择当地盛产的假山石材,如广东地区一般会选择黄蜡石、英德石,浙江、江苏、安徽地区多会选择千层石、太湖石、龟纹石等。
  2、 The commonly used rockery stones for rockery fish pond in rockery stone yard are: Taihu stone, yellow wax stone, thousand layer stone, tortoise grain stone, Yingde stone, water absorbing stone, etc. you can choose the rockery stone which is rich in local area according to the location, such as yellow wax stone and Yingde stone in Guangdong area, and Thousand Layer stone, Taihu stone, tortoise grain stone and so on in Zhejiang, Jiangsu and Anhui areas.
  三、建造假山鱼池1、按施工图纸放线开挖:控制好鱼池的型状,要比做的鱼池实际要大,预留回填土的空间。2、底部扎钢筋:在扎钢筋的同时把鱼池底管一起布置。3、底部布管道:4、倒混泥土:钢筋扎好后倒底部混泥土。5、砌围边:用红砖把鱼池周围砌一圈,把鱼池的形状围出来。6、扎围边钢筋同时布面水管出水管:沿着鱼池的边,把边上的钢筋一起扎起来,在扎边上的钢筋时,把出水管、排水管一起布置。
  3、 Construction of rockery fishpond 1. Setting out and excavation according to the construction drawings: control the shape of the fishpond, which is larger than the actual fishpond, and reserve the space for backfill. 2. Steel bar binding at the bottom: arrange the bottom pipes of the fish pond together with the steel bar binding. 3. Pipe laying at the bottom: 4. Pouring concrete: pouring concrete at the bottom after the reinforcement is tied. 5. Surround: build a circle around the fish pond with red brick to enclose the shape of the fish pond. 6. Bind the surrounding reinforcement and cloth the water outlet pipe at the same time: along the edge of the fish pond, tie the reinforcement on the edge together. When binding the reinforcement on the edge, arrange the water outlet pipe and drainage pipe together.
济南假山制作
  7、建模:钢筋扎完以后,采用木板沿着池壁建模。8、浇注池壁:建模完成以后,往里面浇灌混泥土。9、倒出池胚,磨平池壁鱼池的制作施工在本站的《庭院假山鱼池施工流程图》一文当中,有非常详细的图文介绍。四、假山制作方法根据事先制作的假山模型,经过构思选用适当的树、石、山、草等素材,进行排列组合来完成这一立意。假山制作的基本操作流程,其实就是粘接。粘接山石的胶合剂有水泥(灰、白两种)、环氧树脂、不饱和聚脂树脂。
  7. Modeling: after the steel bar is tied, the wood plate is used to model along the pool wall. 8. Pouring pool wall: after modeling, pour concrete into it. 9. Pour out the embryo of the pond and grind the wall of the pond. The construction of the pond is described in the "flow chart of the construction of the rockery fish pond in the yard" of this station. 4、 According to the rockery model made in advance, the rockery making method selects appropriate materials such as trees, stones, mountains and grass, and arranges them to complete this idea. The basic operation process of rockery making is actually bonding. There are cement (gray and white), epoxy resin and unsaturated polyester resin for bonding.
版权所有:济南老王假山水景园林

咨询热线:
13064079165
在线客服