承接项目
新闻中心

塑石假山中的雕刻工艺!

  大家好,我是小编。提到雕刻技术,我们是不会想到雕刻技术中的雕塑艺术的,塑石假山雕刻技术与雕塑雕刻技术有相似之处,两者都是在雕塑的表面上做出来的形状和质地。塑石假山中的雕塑是在水泥砂浆的表层上雕刻的,仿造的是各种各样的石头。
  Hello, I'm Xiaobian. When it comes to sculpture technology, we don't think of sculpture art in sculpture technology. There are similarities between stone and rockery sculpture technology and sculpture sculpture sculpture technology, both of which are shapes and textures made on the surface of sculpture. The sculptures in the plastic stone rockery are carved on the surface of cement mortar, and all kinds of stones are imitated.
  水泥砂浆已初凝时间,时间在0.5到3小时,在添加各种添加剂,初凝期可以扩展到6个小时,第二和第三层砂浆初凝期是塑料假山石刻,艺术大师通过各种工艺品雕塑假山纹理和小建模。
  The initial setting time of cement mortar is 0.5 to 3 hours. When various additives are added, the initial setting period can be extended to 6 hours. The initial setting time of the second and third layers of mortar is plastic rockery stone carving. Art masters sculpture rockery texture and small modeling through various crafts.
  塑石假山的雕刻技术主要分为两种,一种是塑石;一个雕刻,灰(砂浆)技术,不同的塑料类型雕刻工艺形状结构,主要对砂浆模仿纹理主要是将线的花岗岩,用扫帚或特殊的假山砂浆表面刷,现在已经压花,然后开槽,不添加假山小塑料类型雕刻过程建模。类型塑料假山石雕工艺通过削、刮过程技术雕刻纹理砂浆层,介绍了仿石纹理,纹理AoTuGan强,几乎所有种类的石头可以,雕刻工艺更费时,形状的砂浆生产厚时,通常需要形成两层砂浆,超过3厘米的厚度,使用工具,也有雕刻刀,耙,开槽刀,假山刷等。
济南假山制作
  There are two kinds of carving technology of plastic rock and rockery: one is plastic stone; the other is gray (mortar) technology. Different types of plastic carving process shapes and structures are mainly used to imitate the texture of mortar, which is mainly to brush the line of granite with a broom or special rockery mortar surface. Now it has been embossed, then slotted, and no rockery small plastic type carving process modeling is added. Type plastic rockery stone carving technology carves the texture mortar layer through the cutting and scraping process technology. Finally, it introduces the imitation stone texture, the texture aotugan is strong, almost all kinds of stones can be, the carving process is more time-consuming, when the shape of mortar is thick, it usually needs to form two layers of mortar, more than 3cm thick, using tools, there are carving knife, rake, slotting knife, rockery brush, etc.
  雕刻技术在塑石假山生产中被广泛应用,是假山细纹和小形的关键。假山制作前需仔细参考石材的效果,做当地样品,经甲方批准后,可进行大量施工。
  Carving technology is widely used in the production of stone and rockery, which is the key to the fine grain and small shape of rockery. Before making rockery, it is necessary to carefully refer to the effect of stone materials, make local samples, and carry out a large number of construction with the approval of Party A.
版权所有:济南老王假山水景园林

咨询热线:
13064079165
在线客服