承接项目
新闻中心

仿真树与真正树的区别在哪?

  许多客户有更少的机会接触仿真树和假树,他们会问我们有什么区别水泥仿真树和自然真实的树的身体,本文总结的区别仿真树和真正的树体,供你参考。
  Many customers have less access to simulation trees and fake trees. They will ask us what's the difference between concrete simulation trees and natural real tree bodies. The difference between simulation trees and real tree bodies summarized in this paper is for your reference.
  水泥仿真树是由水泥砂浆制成的仿真树体,其主体为人工造型,与实树的区别主要有三个方面。
  Cement simulation tree is a simulation tree made of cement mortar. Its main body is artificial modeling. There are three main differences between cement simulation tree and real tree.
  1. 水泥模拟树的主干较粗,直径超过40厘米。模拟树的树干由角钢等钢结构焊接而成,并与地面固定。同时,模拟树的树干也固定在钢结构的主干上,因此混凝土模拟树的主干要比天然树的主干粗。一般的水泥模拟树都有一点“肥”的感觉,为了美化粗壮的树干,水泥模拟树体的建模细节越多,技术越多,这也不同于真实自然的树体。
  1. The trunk of the cement simulation tree is relatively thick with a diameter of more than 40 cm. The trunk of the simulation tree is welded by angle steel and other steel structures, and fixed with the ground. At the same time, the trunk of the simulation tree is also fixed on the trunk of the steel structure, so the trunk of the concrete simulation tree is thicker than the trunk of the natural tree. The general cement simulation tree has a little "fat" feeling. In order to beautify the thick trunk, the more modeling details and techniques of the cement simulation tree body, the more different it is from the real natural tree body.
  第二,水泥模拟的树体造型丰富,与真实的树体相比,有一种“变形”的感觉,所谓“变形”就是运用了艺术手法处理,使树体更加可接受。树节、烂条、断叉等细节处多种仿木纹添加,将树体分割得更粗,空间感更强,也能更直观。在水泥模拟树中,常用的品种模拟榕树造型技术是通过送根、缠绕的方式美化较粗的树体,同时增加树节点、烂条等细节。
  Second, the concrete simulation of the tree shape is rich, compared with the real tree, there is a sense of "deformation", the so-called "deformation" is the use of artistic techniques to make the tree more acceptable. A variety of imitated wood patterns are added at the details of tree knots, rotten strips, broken forks, etc., which can make the tree more thick, more spatial and intuitive. In the cement simulation tree, the common modeling technology of the variety simulation banyan tree is to beautify the thick tree body by sending roots and winding, and to add details such as tree nodes and rotten strips.
济南假山制作
  第三,水泥模拟的枝叶与真实的树体相比,是真实变形的地方。水泥砂浆成型和真枝嫁接是制作水泥模拟树枝叶的主要方法。钢丝绑扎和钻孔不能再现真实的树叶,这也是水泥模拟树的主要缺点。其次,分支扩展比例,水泥模拟树受内部结构影响,不能像真实树那样随机扩展,大小较短。
  Third, the branches and leaves simulated by cement are the real deformation places compared with the real trees. Cement mortar molding and true branch grafting are the main methods to produce cement simulated branches and leaves. Steel wire binding and drilling can not reproduce real leaves, which is also the main disadvantage of cement simulation tree. Secondly, the branch expansion ratio, the cement simulation tree affected by the internal structure, can not be as random expansion as the real tree, the size is short.
  四、水泥模拟树模拟树叶不能完全模拟,模拟树叶一般是用塑料或绸布制成,表面光泽度较差,与真实树叶有差距。
  4、 The simulated leaves of cement simulation tree can not be fully simulated. The simulated leaves are generally made of plastic or silk cloth, with poor surface gloss, which is different from the real leaves.
  水泥模拟树与天然树体有四个不同之处。我们很早就发现,我们正在通过不同的工艺进行校正,增加材料的选择范围,从而不断提供水泥模拟树的模仿度和还原度。
  There are four differences between cement simulation tree and natural tree. We have found for a long time that we are adjusting through different processes to increase the range of material selection, so as to continuously provide the imitation degree and reduction degree of cement simulation tree.
  本文由http://www.jnlaowang.com发布
  This article is published by http://www.jnlaowang.com
济南老王假山水景园林

咨询热线:
13064079165
在线客服