承接项目
新闻中心

济南假山制作中假树的制作流程

1 根据施工总平面图 假山制作方法,进行场地整理,畅通道路,对实地进行勘查,复核标高及与周围建筑的相互位置关系,确定施工范围。
1, according to the general plan of construction, rockery production methods, site consolidation, clear the road, the field investigation, review the elevation and the surrounding building of the relationship between each other, to determine the scope of construction.
2、放样开线挖土方浇混凝土垫层打基础。
2, line lofting excavation concrete cushion foundation.
3、预埋件位于现浇砼上表面时,据预埋件尺寸和使用功能的不同,有如下3种固定方式。
In 3, embedded parts of cast-in-place concrete on the surface, according to the embedded size and the use of different functions, there are 3 kinds of fixation methods.
4、平板型预埋件尺寸较小,可将预埋件直接绑扎在主筋上,但在浇筑砼过程中,需随时观察其位置情况,以便出现问题后及时解决。
4, flat plate embedded parts are small in size, can be directly embedded in the main bar lashing, but in the concrete pouring process, the need to observe the position at any time, in order to solve the problems in a timely manner.
5、角钢预埋件也可以直接绑扎在主筋上,为了防止预埋件下的砼振捣不密实,应在固定前先在预埋件上钻孔供砼施工时排气。
5, steel angle can also be directly binding on the main bar, in order to prevent the concrete vibration under non compacting ramming embedded parts, should be fixed before drilling for concrete construction in embedded parts exhaust.
6  面积大的预埋件施工时,除用锚筋固定外,还要在其上部点焊适当规格角钢。建造骨架结构骨架结构有砖结构、钢架结构以及两者的混合结构等。
济南假山制作
6 large construction area embedded parts, except fixed with anchor reinforcement, but also in the upper part of the appropriate specifications of angle steel welding. Construction of skeleton structure, skeleton structure, brick structure, steel frame structure and mix structure of the two.
7、在已经成型的骨架上面铺上小型钢筋,用电焊机焊接、固定、造型。这一步基本能确定假山的基本形状。
7, in the framework has been formed on the small steel reinforcement, welding with electric welding machine, fixed, modeling. This step can basically determine the basic shape of the rockery.
8、铁丝网片绑扎:把钢丝网铺在已经造好型的钢架上假山 制作方法,然后用小钢丝进行捆绑、固定。
8, wire mesh banding: the steel wire mesh in the already made steel frame, rockery manufacturing method, and then use small wire for binding, fixed.
9、泥底塑型用水泥、黄泥、河沙配成可塑性较强的砂浆在已砌好的骨架上塑型。反复加工 假山制作,使造型、纹理、塑体和表面刻划基本上接近模型。
9, mud molding with cement, yellow mud, river sand with a strong plasticity mortar, has been built on the framework of the molding. Repeated processing rockery production, so that the shape, texture, plastic and surface characterization basically close to the model.
10、塑面在塑体表面细致地刻划石的质感、色泽、纹理和表层特征。质感和色泽根据设计。
10, the plastic in the plastic body surface carefully carved stone texture, color, texture and surface features. Texture and color according to the design.
本文由济南假山制作提供,更多的精彩内容请点击我们的官方网站:http://www.jnlaowang.com我们会有更加详细的内容为您解答,感谢您的访问。
This article is made by Ji'nan rockery, more exciting content, please click on our official website: http://www.jnlaowang.com, we will have more detailed answers for you, thank you for your visit.
版权所有:济南老王假山水景园林

咨询热线:
13064079165
在线客服