承接项目
新闻中心

塑石假山的雕刻制作工艺介绍!

  提起雕刻的过程,你想到的雕刻艺术的雕刻技法,石假山的雕刻工艺与雕刻的雕刻技法有着相同的效果,两者都是在雕刻的表面产生造型和质感。塑石假山雕刻是在水泥砂浆的表面雕刻,仿造的是各种石粒,小编今天为大家简要介绍一下塑石假山的制作雕刻过程。
  When it comes to the carving process, you think of the carving techniques of the carving art. The carving techniques of the stone rockery have the same effect as the carving techniques. Both of them produce modeling and texture on the surface of the carving. Plastic stone rockery is carved on the surface of cement mortar. It imitates all kinds of stone particles. Today, I will briefly introduce the process of making and carving plastic stone rockery.
  水泥砂浆有一段时间的初始设置,时间在0.5到3小时,在添加各种添加剂,初凝期可以扩展到6个小时,两个或三层砂浆初凝期是雕刻的雕刻石假山时期,艺术家通过各种工艺雕刻大师假山纹理和小建模。
  Cement mortar has an initial setting for a period of time, the time is 0.5 to 3 hours. When adding various additives, the initial setting period can be extended to 6 hours. The initial setting period of two or three layers of mortar is the period of carving stone and rockery. Artists carve master rockery texture and small modeling through various crafts.
济南假山制作
  塑石假山的雕刻工艺主要分为两种类型,一种是塑型;一个雕刻,灰(砂浆)技术,不同的塑料类型雕刻工艺形状结构,主要对砂浆模仿纹理主要是将线的花岗岩,用扫帚或特殊的假山砂浆表面刷,现在已经压花,然后开槽,不添加假山小塑料类型雕刻过程建模。类型塑料假山石雕工艺通过削、刮过程技术雕刻纹理砂浆层,介绍了仿石纹理,纹理AoTuGan强,几乎所有种类的石头可以,雕刻工艺更费时,形状的砂浆生产厚时,通常需要形成两层砂浆,超过3厘米的厚度,使用工具,也有雕刻刀,耙,开槽刀,假山刷等。
  The carving process of plastic rock rockery is mainly divided into two types, one is plastic type; the other is carving, grey (mortar) technology, different plastic type carving process shape structure, mainly imitating the texture of mortar mainly is to brush the line of granite with a broom or special rockery mortar surface, now it has been embossed, and then slotted, without adding rockery small plastic type carving process modeling. Type plastic rockery stone carving technology carves the texture mortar layer through the cutting and scraping process technology. Finally, it introduces the imitation stone texture, the texture aotugan is strong, almost all kinds of stones can be, the carving process is more time-consuming, when the shape of mortar is thick, it usually needs to form two layers of mortar, more than 3cm thick, using tools, there are carving knife, rake, slotting knife, rockery brush, etc.
  雕刻技术在假山生产中应用广泛,是假山细纹和小形的关键。济南假山制作前需仔细参考石纹效果,做当地样本,经甲方批准,方可大量施工。
  Carving technology is widely used in the production of rockery, which is the key to the fine grain and small shape of rockery. Before the rockery, it is necessary to carefully refer to the stone grain effect, make local samples and obtain the approval of Party A before large-scale construction.
版权所有:济南老王假山水景园林

咨询热线:
13064079165
在线客服