承接项目
新闻中心

塑石假山中的雕刻工艺介绍!

  当提到雕刻过程时,您是否想到雕塑艺术中的雕刻技术? 塑料假山生产中的雕刻技术与雕塑中的雕刻技术具有相同的效果。 它们都在雕刻表面上形成形状和纹理。 塑料假山上的雕刻是刻在水泥砂浆的表面上的,水泥砂浆是各种石材图案。 今天,小编将在塑料假山生产中介绍雕刻工艺。
  When it comes to the process of sculpture, do you think of the sculpture technology in the art of sculpture? The sculpture technology in the production of plastic rockery has the same effect as the sculpture technology in the sculpture. They all form shapes and textures on the carved surface. The sculpture on the plastic rockery is carved on the surface of cement mortar, which is a variety of stone patterns. Today, Xiaobian will introduce sculpture technology in the production of plastic rockery.
  水泥砂浆的初始凝固时间为0.5至3小时。 在添加各种添加剂的情况下,初始凝固时间可以延长至6小时。 第二层砂浆和第三层砂浆的初始凝固时间是在塑料假山中雕刻的时间。 艺术家通过各种技术掌握了假山的质地和微妙的形状。
  The initial setting time of cement mortar is 0.5 to 3 hours. When various additives are added, the initial solidification time can be extended to 6 hours. The initial solidification time of the second and third layers of mortar is the carving time in the plastic rockery. The artist has mastered the texture and subtle shape of the rockery through various techniques.
  塑料假山的雕刻工艺主要分为两种,一种是塑料型。 另一种是雕刻型,两者的区别在于灰分法(灰浆法),而塑料雕刻工艺主要在砂浆表层上形成纹理。 仿纹理主要是石头的麻点。 砂浆的表面用扫帚或假刷子打浆。 使用压纹图案,然后打开接缝。 塑料雕刻工艺几乎不会增加假山的小形状。 雕刻型塑料假山技术通过切割和刮擦在灰浆表面上雕刻纹理,后呈现出石头般的纹理。 质地具有很强的凹凸纹理,几乎可以生产各种石材图案。 雕刻过程很耗时。 在生产过程中形成的砂浆层较厚,通常需要两层砂浆形成,厚度大于3 cm,使用的工具更多,包括雕刻刀,镊子,纵剪刀,假山刷等。
济南假山制作
  The sculpture technology of plastic rockery is mainly divided into two kinds, one is plastic type. The other is sculpture, the difference between them is ash method (mortar method), while plastic sculpture technology mainly forms texture on the surface of mortar. The imitation texture is mainly the pitting of stone. The surface of the mortar is beaten with a broom or a fake brush. Use embossed patterns and open the seams. Plastic sculpture hardly adds to the small shape of the rockery. Sculptured plastic rockery technology carves texture on mortar surface by cutting and scraping, and finally presents stone-like texture. The texture has strong concave and convex texture, and can produce almost all kinds of stone patterns. The carving process is time-consuming. The mortar layer formed in the production process is thicker. Usually two layers of mortar are needed. The thickness is more than 3 cm. More tools are used, including carving knives, tweezers, longitudinal scissors, rockery brushes and so on.
  雕刻工艺广泛用于塑料假山的生产,这是假山细线和小形状的关键。 在制作假山之前,您需要仔细参考石材效果并进行部分采样。 只有经过甲方批准,才能进行大规模建设。
  Sculpture technology is widely used in the production of plastic rockery, which is the key to the fine lines and small shapes of rockery. Before making rockery, you need to carefully refer to the stone effect and take some samples. Only with Party A's approval can large-scale construction be carried out.
版权所有:济南老王假山水景园林

咨询热线:
13064079165
在线客服