承接项目
新闻中心

水泥仿木栏杆涂层施工方法

水泥仿木栏杆涂层施工方法有哪些呢?下面就由禧福规划设计院给大家介绍一下,希望我们的介绍可以更好的帮到你们。
What are the construction methods of the wood imitation railing coating? The following by the Xifu Planning and Design Institute to introduce to you, I hope our introduction can better help you.
1、基层处理:先把混凝土构件基层表面残留的边楞、浮灰、浮沙石及油渍等清除净,然后用107胶加水1倍调合均匀涂刷底层,稍干后即可进行下一步工序。
1. Base treatment: first, the concrete components of the base surface residual corrugated, floating ash, floating sand stone and oil stains, etc. clean, and then with 107 glue and water 1 times blended evenly brush the bottom, slightly dry after the next process.
济南假山制作
2、刮布涂层:把配制好的涂层材料用刮板用力将其布开,每次厚度约在0.5cm左右。待前层涂层稍显干燥后,即可刮涂第二层,一般刮涂2~3次即可。
2. Scraper coating: The prepared coating material is forced to be spread with the scraper, each time the thickness is about 0.5 cm. After the coating is slightly drier, second layers can be scraped and scraped 2~3 times.
3、涂层表面处理:施工涂层待干燥后,需用0号铁砂布将其磨平打光,磨后表面颜色会深浅不均,再涂刷107胶色浆一道,稍干后即涂刷2~3层氯乙烯-偏氯乙烯共聚乳液。经过这种方法处理的内檐涂层,色彩均匀鲜艳、丰满度好,富有装饰效果,耐化学腐蚀。107胶色浆配合比为:l07胶10,氧化铁类颜料1.5~2.5,水4~5。
3, coating surface treatment: after construction coating is dry, it needs to be polished and polished by 0 iron sand cloth. After grinding, the surface color will be uneven, and then brush with 107 color paste. After a little drying, it will coat 2~3 layer vinyl chloride vinylidene chloride copolymer emulsion. The inner eaves coatings treated by this method have bright and uniform colors, good plumpness, decorative effect and chemical corrosion resistance. The mixing ratio of 107 gel paste is: l07 glue 10, iron oxide pigment 1.5~2.5, water 4~5.
以上关于水泥仿木栏杆涂层施工方法的介绍是由济南假山制作整理编辑,想要了解更多的内容,可以浏览我们的网站:http://www.jnlaowang.com,在网站中有更多的内容,希望能为你提供帮助!
The above introduction about the construction method of cement imitation wood balustrade coating is made and edited by Jinan Rockery. For more information, visit our website: http://www.jnlaowang.com, there are more content in the website, hoping to help you!
版权所有:济南老王假山水景园林

咨询热线:
13064079165
在线客服